1C integration with Regula document readers

Brief Description

This instruction describes the process of integrating Regula readers with 1C software using a COM object (READERDEMO.RegulaReader).

Requirements

• Installed 1C software version 7.7 or 8.2.
• 32-bit version of Regula Document Reader software (available for download here).
• Documentation for the COM object (available for download here).

Required Steps

1. Download integration examples for versions 1C 7.7 and 1C 8.2 via this link.
2. Review examples of connecting to the reader and retrieving data from the examples.
3. Study the documentation for the COM object:
   • COM Interface Documentation
   • Programmer's Guide (English)
   • Programmer's Guide (Russian)
4. Ensure that only the 32-bit version of Regula Document Reader is used.

Result Verification

To verify the correctness of the integration, perform the following steps:

• Connect the reader and ensure that the data is read correctly.
• Check the logs for any errors or warnings.
• Make sure the data is displayed in the 1C software.

Common Errors and Solutions

• Reader connection error: Ensure that the reader drivers are installed and updated to the latest version.
• Data reading issues: Check the correctness of the COM object configuration and ensure the software version meets the requirements.